First this only works for the larger calibers(sorry 9mm and below).
Buy a set of molds for the caliber you use making sure its the heavy flat point type. A good source of bullet material is wheelweights.
Cast as instructed, then get a 1/4 in drill bit and tape to the maximum stop depth. {about 3/4 of the way in).
Now comes the hard part. Fill the cavity with mercury almost to the top af the bullet nose. Then, using epoxy, seal the cavity, and wait 24 to 48 hours for it to dry. Reload in your case and fire away.
NOTHING lives though one of these hitting them as the mercury "explodes" inside them, and mercury is poisonous.
No comments:
Post a Comment