NOTICE: TO ALL CONCERNED

Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.

Tuesday, March 17, 2009

How to Make A Stungun

 How to Make A Stungun

by The Green Dean

So you want to ZaaaaaaP the shit out of someone. Well I have the thing just for you. It delivers a nice Shock of 75,000 Volts and causes muscle spasms. A word of caution don't try this on your self (Dumb Shit). Well you be need'n to go down to your local RADIO-SHACK. Yes that is what I said RADIO-SHACK where they sell shitty computers. Just for a joke tell'em you want to buy a TANDY 2000 to use for a clock, and watch'em turn red. Then say "just kidding(dick)", under your breath of course. Well enough of that shit, Here is what you need.

PARTS
=====
All resistors are 1/2 watt.Abbrv. as R1 or R2.
----------------------------------------------
R1 & R2 100,000 ohm's resistors!
R3 & R4 500,000 ohm's resistors!
----------------------------------------------
DIODES:D1-D4
Use a 75 PIV BRIDGE RECTIFIER or 4 1N9004's 300 VOLTS.
----------------------------------------------
Capacitors:
C1&C2 4700uF electrolytic
----------------------------------------------
TR1-STEP UP TRANSFORMER 55 uH AUDIO
----------------------------------------------
2 250 volt AC DPST switch
----------------------------------------------
A 9volt RECHARGEABLE/100 volt Neon lamp =L
----------------------------------------------
A 9volt battery clip/MALE-FEMALE RCA JACKS
----------------------------------------------
Some perf board,wire,solder
----------------------------------------------
9volts in
- +
/ to RCA JACK /
|---* *-------------| Use RCA JACK TO HOOK TO A RECHARGER.
| sw2 | Run JACK FROM 9V.
|----|<-----|<------|
| d1 d2 | When battery runs down Recharge it!
|----|<-----|<------|
| d3 d4 |
| |
\ /
/ R1 \ R2
\ /
| + |
|----|(-------------|
| c1 |
\ \
/ /
\ \
| R3 - | R4
|----|(-------------|
| c2 L Neon charge light/ Push sw1 to fire when light is on
|/ |
* *---------| |
sw1 | |
+ n -
=======
/\/\/\/ TR1
=======
| | needles or prods
| |
\|/ \|/

When this is built hold down sw2 until neon lamp lights. Then Stick "THE VICTIM" And press SW1 ,He will get a jolt. Well I hope you have fun. Just don't throw this into a swimming pool full of "VICTIMS"! If you do this then well You'll see! 

No comments:

Post a Comment